How To Install Led Lights In A Room

The installation guide is for 12V LED strip light kit. LED strip Lights are great for decorating your abode. Its elementary and superb design tin can embellish the color of the abode stereo infinite and enhance the atmosphere.

Now you tin can watch the video or follow the steps below to check how to install, cut and connect LED strip lights.

Part i. How to Install LED Strip Lights

Part ii. How to Cut LED Lights Strip

Part 3. How to Connect LED Strip Light Sections

Part 1. How to Install LED Strip Lights?

Step ane. Dry and clean the surface

Before adhering any strip lights, clean the surface of the area you volition exist placing the lights on. This is vital to keeping information technology mounted for a long fourth dimension to come up. Information technology is recommended to use your strip lights on smooth stable surfaces. It should not be placed on crude or textured surfaces or any surfaces that can bend or move.

Step 2. Unroll the light strip, stick to the surface

The LED strip lights come rolled on a spool. But unroll the length of lighting you volition be working with, remove the adhesive backing and stick to the desired surface. Press downward on each role of the strip and so it is firmly adhered to the surface and has no air bubbles.

Y'all can use fixing clips to strengthen the strip light's installation and ensure they stay in identify. Pare off the adhesive tape and utilize information technology to the surface with the non-pasty area over the strip light.  If you choose, you lot can secure the clip further past screwing it to the surface.

Observe: Not all of the LED strip lights on lepro.com are equipped with the fixing clips, please check the new models if needed.

Step 3. Connect LED light strip and plow on the lite

Once your strip lights are secured, you can attach information technology to the controller and ability adapter, and so plug it into an electrical outlet. Using the remote control, remove the insulation sheet first, press whatsoever color on the remote control to alter the lighting colour.

Office 2. How to Cut LED Lights Strip

Each strip calorie-free has special designated sections where you can cutting the strip. Exist sure to make a clean directly cutting but in these designated sections. Cutting it in a non-designated area will damage the strip lights.

Role three. How to Connect LED Strip Light Sections

Did you know you can design your strip lights to brand twists and turns, go around corners or even over not-flat surfaces? Apply the corner or directly flexible connectors and connector clips.

To join two strip lite sections together, use a connector clip. Push the open end of each strip into the prune, then shut it to lock it in.

To make your light strips become effectually a corner, use 1 corner connector and 2 connector clips.

You tin can even make your strip lights get over uneven surfaces if you demand to. Connect a flexible strip connector to the strip lights and over the uneven area. Connect the other cease to the rest of the lighting.

Now y'all can feel gratis to modify and cull the light color atmosphere you want. If you use a remote control, don't forget to unplug the battery insulation sheet before employ.

For rough surfaces, you lot may need to install mounting clips to continue the strip light stable. For moist places similar bathrooms, waterproof strip lights are recommended. And now you can check the LED strip lights category to get more than.

Source: https://www.lepro.com/learning/how-to-install-led-strip-lights/

Posted by: richardsonhisled.blogspot.com

Share this post